Pioneer vsx-d512 Manuale Utente

station, press ENTER within the 5 seconds.
If you don’t press 

ENTER, searching resumes.

If 

NO PTY is displayed it means the tuner

couldn’t find that program type at the time of
the search.

RDS searches station presets only. If no
stations have been preset (see pages 39 to do
this), 

NO PTY is displayed. FINISH means the

search is complete.

When EON is turned on, the receiver jumps to
an EON-linked broadcast when it begins, even if
a receiver function other than the tuner is being
used. It cannot be used in areas that EON
information is not transmitted and when FM
broadcast stations do not transmit PTY data.
When the broadcast ends, the tuner returns to
the original frequency or function.

There are two types of EON you can set:

1

TA (Traffic Announcement)

This mode will set the tuner to pick up traffic
information when it’s broadcast.

2

This mode will set the tuner to pick up news
when it is broadcast.

EON does not work when the tuner is in the
AM band.

Use the front panel controls to do this.

band.
EON is only broadcast on FM.

The 

‡

 indicator lights to inform you that the

currently tuned station carries the EON data
service. See pages 36 for more on tuning into
radio broadcasts.

the mode you want.
These modes are explained on the previous
page.

Each press changes the display as follows:

If EON information is being transmitted, the
receiver jumps to the type of broadcast you
selected. When the EON mode is set, the 

indicator lights, but during actual reception of
an EON broadcast the 

EON indicator will flash.

XRE3068A.En.36.43

03.2.3, 11:14 AM

41