Pitney Bowes DM1000 Manuale Utente

Use the internal analog modem 

to connect directly to an analog phone line.
If your mailing system is not located near an analog phone line and you 

need to remove the control center when you perform feature updates or 

add postage, refer to Connecting Your Postage Meter to a Remote Analog 
Line

 in this section.

If you need to connect to an analog phone line that is not located near your 

mailing system, you can remove the IntelliLink® Control Center and move it 

to a location near the analog phone line. At the remote location, plug one 

end of the AC Adapter (P/N 1C85005) into the back of the control center 

and the other end into an AC outlet. 
To remove the control center and move it to another location: 
1. Turn off the power to the mailing system.

2. Pull the blue lever at the right of 

the control center towards you. 

3. Slide the control center forward 

to remove it.

4. Take the control center to 

where the analog phone line is.

5. Connect the telephone cord 

(AWG 26) from the internal 

analog connector to the analog 

telephone line. 

6. Connect the A/C Adapter (P/N 

1C85005) to the back of the 

control center and plug it into 

an AC outlet.