Pitney Bowes DM1000 Manuale Utente







Your mailing system displays a message telling you when your E-Z Seal® 

Solution is running low. When you receive this message, your system can 

still seal approximately 50 envelopes.

1. Open the main cover and 

lift out the flap moistener 

bottle.The bottle is located 

to the left of the tape roll.

2. Remove the cap from the 

bottle.

3. Add enough E-Z Seal® to 

bring the level up to the 

bottom of the fill cap. 

4. Replace and tighten the 

cap and return the bottle to 

its original position. 

5. Close the main cover. 

1. Open the main cover and 

lift out the tape moistener 

bottle.The bottle is located 

near the tape exit.

2. Remove the cap from the 

bottle.

3. Add enough E-Z Seal® to 

bring the level up to the 

bottom of the fill cap. 

4. Replace and tighten the 

cap and return the bottle to 

its original position. 

5. Close the main cover. 

  

•

Pitney Bowes recommends using E-Z Seal® Solution 

because it helps keep your moistener tank clean and 

improves sealing efficiency. To order E-Z Seal® Solution, 

refer to Chapter 11, Supplies and Options in this guide.

•

Do not overfill the E-Z Seal® bottle.

•

Make sure you do not spill any solution in the tape well. If 

the tape gets wet, it can warp and cause a jam.

Flap Moistener Bottle

Tape Moistener Bottle