Pitney Bowes DM1000 Manuale Utente

5. Use the thickness adjustment 

knob to adjust for envelope 

thickness. 

• For thicker pieces of mail 

(3/8” to 5/8”), or mail contain-

ing several inserts, use the 

thick mail setting. For most 

mail under 3/8", use the nor-

mal mail settings.

• For large stacks of thin mail, 

such as single inserts or post 

cards, the thin mail setting 

may be needed for better 

performance. Refer to the 

figure on the right.

To pick a setting, turn the knob to 

the arrow located on the feed 

cover. 

6. Make sure you have sufficient funds in your postage meter. If the mes-

sage “Low Funds” appears on the screen, make sure you can complete 

the mail run with the funds you have. If you do not have enough funds, 
see Chapter 6, Adding Postage in this guide.

1. Press the Mode key on the IntelliLink® Control Center. 

2. Select Key In Postage. 

3. Key in the correct postage value using the numeric keys on the control 

center, then press Enter.

4. Place the piece of mail on the feed deck and press the Start key.