Patton electronic industrial ethernet extender with lcd interface 3231 Manuale Utente

SNMP

Model 3231 User Manual 

You can use the Web GUI to configure SNMP. (See 

 on page 26).

It is NOT reccommended that you configure basic options through the Web 
GUI. Use the LCD panel menu to configure basic options such as 
G.SHDSL, and use the Web GUI for advanced configuration only, such as 
SNMP. 

This section describes how to configure the SNMP server so that an agent can monitor the unit via SNMP. To 
get to the SNMP configuration page in the Web GUI, click on System Configuration > SNMP Daemon on 
the left navigation menu. 

Figure 12.  SNMP Settings in the Web GUI

From this page, you can configure the following options:

•

Static Variables: Set the system MIB variables.

•

Community Table: Add/delete communities that have access to this unit. The password is the community 
string. If the management IP is 0.0.0.0, all requests from that community will be accepted regardless of the 
originating IP address.

•

Trap Table: Add/delete trap daemons. The IP address is the address of the PC running a trap daemon. The 
unit will send SNMPv1 traps on DSL and Ethernet link up and down events.

•

Save SNMP Configuration: Save SNMP configuration. For SNMP configuration to persist across reboots, 
click the Save button on this page, and then, save the system configuration. Both must be done in that 
order.