Python 671xp Manuale Utente

QUICK REFERENCE GUIDE

To arm using your 2-way remote

➤

You can activate, or arm, the system by pressing

on your remote for one

second. When the system arms, you will hear a short siren sound, or chirp, and
the parking lights will flash once. If the vehicle’s power door locks have been
connected to the system, the doors will lock.

To disarm using your 2-way remote

➤

To disarm the system, press

. You will hear two chirps, and the parking

lights will flash twice. If power locks are connected to the system, the doors will
unlock. If the siren chirps either four or five times when disarming, see
Diagnostics section. This is called Tamper Alert.

Arming while driving

➤

Press

on your remote for two second while the vehicle is running. The

system will chirp once and then once more to indicate that the ignition is on.

Disarming without a 2-way remote

➤

Turn on the ignition. Press and release the Valet

button the programmed

number of times within 15 seconds. After five seconds, the system will disarm.
If it does not, you may have waited too long. Turn the ignition off and on and
try again.

To enter or exit Valet

Mode

➤

Turn ignition to RUN position, then turn to OFF position. Press and release
the Valet

button within 10 seconds. The in-vehicle status LED will light solid

if you are entering Valet

Mode, and it will go out if you are exiting Valet

Mode.

To activate Panic Mode

➤

Press and hold

down for one second.

To exit Panic Mode

➤

Press

on the remote.

To activate Silent Mode™

➤

Press

briefly before arming or disarming, and the confirmation chirp(s)

will be eliminated for that one operation only.

Location of Valet

Button_______________________________

Number of Valet

Button pulses for disarming_____________

CCuu

aall

tttt

eedd

iinn

aann

lldd

iicc

aann

aass

rree

ffee

rree

ccee

eeee

rrss

aall

llee

tt..

✂✂

✂ ✂