Garmin g1000 beechcrafta36 g36 audiopanel pilots guide Manuale Utente
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
190-00573-00 Rev. A
6-5
OPERATION
Transmitting
When a transmitter is keyed, the active transceiver
MIC key annunciator blinks approximately once per
second. A white TX indication appears next to the active
COM frequency on both the PFD and the MFD during
transmission.
second. A white TX indication appears next to the active
COM frequency on both the PFD and the MFD during
transmission.
NOTE: Audio level of the COM radio(s) is
controlled by the COM volume controls located
on both the PFD and MFD (see the VHF NAV/COM
Pilot’s Guide).
on both the PFD and MFD (see the VHF NAV/COM
Pilot’s Guide).
OPTIONAL COM MUTING
COM muting on receive and COM muting on transmit
options can be disabled if desired. Contact a Garmin-
authorized service center for details.
authorized service center for details.
COM Muting on Receive
When COM muting on receive is enabled, all secondary
COM audio is muted during detection of received primary
COM audio.
COM audio.
NOTE: If COM muting on receive option is
enabled, only primary COM radio reception is
recorded by the digital clearance recorder.
enabled, only primary COM radio reception is
recorded by the digital clearance recorder.
COM Muting on Transmit
When COM muting on transmit is enabled, all
secondary COM audio is muted during transmission over
the primary COM radio.
the primary COM radio.
SPLIT COM FUNCTION
Pressing the COM 1/2 key selects the split COM
function. During split COM operation, the COM1,
COM1 MIC, COM2 and COM2 MIC keys are active.
COM1 MIC, COM2 and COM2 MIC keys are active.
When the COM 1/2 key is selected, COM1 is used by
the pilot for transmission and COM2 is used by the copilot.
The COM1 MIC annunciator blinks when the pilot’s
microphone is keyed and the COM2 MIC annunciator
blinks when the copilot’s microphone is keyed.
The COM1 MIC annunciator blinks when the pilot’s
microphone is keyed and the COM2 MIC annunciator
blinks when the copilot’s microphone is keyed.
In this mode, both the pilot and the copilot can
transmit simultaneously over separate radios. The pilot
can still monitor NAV1, NAV2, DME and MKR audio as
selected, but the copilot is only able to monitor COM2.
can still monitor NAV1, NAV2, DME and MKR audio as
selected, but the copilot is only able to monitor COM2.
Split COM mode is cancelled by pressing the COM 1/2
key again.
NOTE: Split COM performance varies significantly
across installations and is affected by both
the distance between the antennas and the
separation of the tuned frequencies.
the distance between the antennas and the
separation of the tuned frequencies.
PA FUNCTION
A passenger address function is provided by pressing
the PA key. Push-to-talk (PTT) must be used to deliver PA
announcements over the headsets.
announcements over the headsets.
SPEAKER
All of the radios can be heard over the cabin speaker.
Pressing the SPKR key selects and deselects the cabin
speaker. Speaker audio is muted when the PTT switch
is keyed.
speaker. Speaker audio is muted when the PTT switch
is keyed.
The speaker volume is adjustable above and below
a nominal value. Contact a Garmin-authorized service
center for details.
center for details.