Philips 14pv334 Manuale Utente
Initial installation
a
Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
and place the batteries in it as shown in the picture.
b
Close the battery compartment.
c
If you have connected the aerial to the TV-VIDEO Combi,
press the
press the
OK
button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
appear on the screen:
Searching...
CHANNELS FOUND:
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
Wait until all TV channels have been found. This can take
several minutes.
When ’autoinstall’is ready, ’
several minutes.
When ’autoinstall’is ready, ’
Installation comp.
’
will briefly appear on the screen.
D If you have connected a decoder, you must install it
as described in the next section.
D If you have connected a satellite receiver, please
read the section ’satellite receiver’.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a
Select the TV channel for which you want to use the
decoder with the
decoder with the
P p
button on the TV-VIDEO Combi
or the number buttons
0-9
on the remote control.
b
Press the
MENU
button on the remote control. The main
menu will appear.
c
Select the line ’
Installation
’ with the
BP r
or
AP q
buton and confirm with the
SqC
button.
d
Select the line ’
Manual store
’ with the
BP r
or
AP q
button and confirm with the
SqC
button.
e
Select the line ’
Decoder
’ with the
BP r
or
AP q
button.
MANUAL STORE
Channel/Frequency
FREQU.
Search
123
Fine tuning
(,,,,=,,,,$
Name edit
xxx
Programme number
01
Decoder
OFF
ã Exit:
« press MENU
« press MENU
f
Select function ’
ON
’ with the
DSr
or
SqC
button. When you select ’
OFF
’, the function will be
switched off.
g
Confirm with the
OK
button.
h
To end, press the
MENU
button.
Your decoder has now been allocated to this TV channel.
i
Press the
MENU
button again.
D If you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’
function ’
Manual store
’.
2.
INSTALLING YOUR TV-VIDEO COMBI
5