Grizzly G5770 Manuale Utente
-16-
g5770 36" slip roll 22 gauge
3. turn the radius adjust knobs to lift the rear
roller until the desired radius bend is reached
(
(
figure 18). Make sure to turn the knobs
equal amounts so the rear roller is always
parallel with the other rollers. Failure to do so
will create a larger radius on one end than the
other, resulting in a cone or spiral shape.
parallel with the other rollers. Failure to do so
will create a larger radius on one end than the
other, resulting in a cone or spiral shape.
8L
figure 18. setting the radius.
2. turn the crank clockwise to feed the workpiece
until its front edge is directly above the rear
roller, as shown in
roller, as shown in
figure 17.
figure 17. Feeding the workpiece.
4. turn the crank to process the material
through the slip roll. Continue turning until
the workpiece is completely through the top
and bottom rollers (
the workpiece is completely through the top
and bottom rollers (
figure 19).
this machine poses a crushing hazard if
workpieces are not properly supported
when exiting the rollers. If necessary, get
assistance to support the workpiece. Make
sure all helpers are wearing safety glasses,
leather gloves, and steel toed footwear
when assisting in the use of this machine.
figure 19. processing the workpiece.
Depending on the size and shape of your
workpiece, you may need assistance to sup-
port the workpiece as it exits the machine.
failure to adequately support the workpiece
may result in the workpiece falling, causing
injuries.