Philips 32PW6332 Manuale Utente
18
Connecting peripheral equipment
The
EXT1
socket has audio and video inputs/outputs and RGB inputs.
The
EXT2
socket has audio and video inputs/outputs and S-VHS inputs.
For further information, see glossary (p. 22).
• If your video recorder has a euroconnector socket, carry out the above
connections. Euroconnector sockets ensure better picture quality.
• If your video recorder does not have a euroconnector socket (or if this is already
being used by another device), then the only connection possible is via the aerial
cable.Your video recorder is then considered as a TV programme by your TV set.You
will therefore need to tune in your video recorder's test signal and assign it
programme number 0 (see manual store chapter, p. 5).
To reproduce the video recorder picture, press the
will therefore need to tune in your video recorder's test signal and assign it
programme number 0 (see manual store chapter, p. 5).
To reproduce the video recorder picture, press the
key.
Refer to your video recorder's operating instructions concerning the test signal
(the video recorder must be equipped with an HF modulator).
(the video recorder must be equipped with an HF modulator).
Video recorder
...with Decoder
Connecting other equipment
(satellite receiver, decoder, CDV/CDI, games...)
Connect to socket
EXT1
(or to
EXT2
if it produces a
S-VHS
signals).