Philips aj6111 Manuale Utente
7
English
The set complies with the FCC-Rules,
Part 15 and with RSS-210 of Industry
Canada.
Part 15 and with RSS-210 of Industry
Canada.
Operation is subject
to the following two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
to the following two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Supplied accessories
–
–
Remote control (with 1 x CR2025 battery)
– Mounting kit:
1 x template, 4 x spacers, 8 x screws
1 x template, 4 x spacers, 8 x screws
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene and polyethylene (bags, protective
foam sheet).
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene and polyethylene (bags, protective
foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Maintenance
Cleaning the Cabinet
●
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
●
When a disc becomes dirty, clean
it with a cleaning cloth. Wipe the
disc from the center out.
it with a cleaning cloth. Wipe the
disc from the center out.
●
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analog records.
benzene, thinner, commercially
available cleaners, or antistatic
spray intended for analog records.
Cleaning the disc lens
●
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with any
commercially available cleaner. Follow the
instructions supplied with cleaner.
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with any
commercially available cleaner. Follow the
instructions supplied with cleaner.
Safety information
●
Place the system on a flat, hard and stable
surface.
surface.
●
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
●
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system.
ventilation to prevent internal heat build-up in
your system.
●
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.
●
The apparatus shall not be exposed to dripping
or splashing.
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
●
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
lubricating bearings and must not be oiled or
lubricated.
General Information
CAUTION
Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
cover is open, do not look at the beam.
High voltage! Do not open. You run the risk
of getting an electric shock.
of getting an electric shock.
The machine does not contain any user-
serviceable parts.
serviceable parts.
Modification of the product could result in
hazardous radiation of EMC or other
unsafe operation.
hazardous radiation of EMC or other
unsafe operation.
p001-p018_AJ6110_37-Eng
3/3/2006, 16:32
7