Philips dvd737 Manuale Utente
10
Optional : Connecting to an
Audio System
Audio System
COAXIAL
L
R
TV OUT
VIDEO
LEFT
AUDIO IN
AUDIO IN
RIGHT
AUDIO IN
AUDIO IN
STEREO
TO STEREO
AUDIO IN
AUDIO IN
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
or Right / Left Audio In jack
1
Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In, Video In, Composite or Baseband)
on the TV
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In, Video In, Composite or Baseband)
on the TV
(cable not supplied).
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Connections
Optional : Connecting Digital AV
Receiver
Receiver
COAXIAL
L
R
TV OUT
VIDEO
AV Receiver
COAXIAL IN
TO Digital AV Receiver
DIGITAL AUDIO IN
DIGITAL AUDIO IN
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or SCART jack (TV
OUT) depending on the options available
on your TV.
(CVBS VIDEO IN or SCART jack (TV
OUT) depending on the options available
on your TV.
2
Connect the COAXIAL jack of the DVD
Player to the corresponding COAXIAL
Digital Audio In jack on your Receiver
(cable not supplied).
Player to the corresponding COAXIAL
Digital Audio In jack on your Receiver
(cable not supplied).
3
Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver
PCM-ONLY or ALL depending on the
capabilities of your Receiver
(see page 25
“Digital Output”).
Helpful Hint:
–
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
receiver, the receiver will produce a strong,
distorted sound or no sound at all.