Garmin GPSMAP 76 Manuale Utente

47

47

 the GPSMAP 76 will automatically name the route 

using the fi rst and last waypoint names as a reference.  To change the Route 
Name, place the highlight over the Name fi eld then press ENTER.  When 
you have fi nished, press ENTER to save the new name.

To edit a route the unit must be on the Route Page.  When editing a route 

you can Insert a Waypoint, Remove a Waypoint, Reverse the Route, Delete the 
Route or choose to edit the route on the Map Page.  To display the Route Edit 
Options, press the MENU Key.

This will display the Map Page with the Route Line active and 

the Map Pointer located on the waypoint highlighted on the Route Page.  

‘Review’ Route Waypoint — 

To review information on a route waypoint, place 

the Map Pointer on the waypoint then press ENTER. This will display 
an options menu, highlight ‘Review’ then press ENTER to display the 
waypoint information.

Inserting a New waypoint —

 There are two methods that can be used to insert 

a new waypoint into a route. 

1.   Place the Map Pointer on the route leg that you want to insert the new 

point in, the line will turn to a small dashed line.  Press ENTER, the 
Map Pointer will have “Ins” under it.  Move the Map Pointer dragging 
the Route Line to the location that you want the new point at then press 
ENTER.  If the new location is a Map Feature, the point will be inserted 
in the leg.  If the location is not on a Map Feature, the New Waypoint 
Page will be displayed, press ENTER to save the new waypoint then 
ENTER again to insert the new waypoint in the route.

190-00230-00.indd

03/15/01, 9:26 AM

47