Garmin g1000 beechcrafta36 g36 nav com pilots guide Manuale Utente
Garmin G1000 NAV/COM Pilot’s Guide for the Beechcraft A36/G36
190-00572-00 Rev. A
4-18
OPERATION – AUTO-TUNING
AUTO-TUNING ON APPROACH ACTIVATION
(NAV FREQUENCIES)
(NAV FREQUENCIES)
NAV frequencies are automatically loaded into the NAV
Frequency window on approach activation, regardless of
the display unit being used.
the display unit being used.
NOTE: The primary NAV frequency becomes
auto-tuned upon loading an approach.
auto-tuned upon loading an approach.
To auto-tune a NAV frequency if the desired
approach is not already loaded:
approach is not already loaded:
1. Press the PROC key to open the Procedures
window.
2. Turn the large FMS knob to highlight the
‘SELECT APPROACH’ menu option and press
the ENT key.
the ENT key.
3. Use both the FMS knob and the ENT key as
needed to select the desired airport, VOR/ILS
approach and transition.
approach and transition.
4. Turn the large FMS knob to highlight either the
‘LOAD?’ or ‘ACTIVATE?’ prompt and press the
ENT key. The primary NAV frequency for the
activated approach is loaded into the standby
field of the selected NAV radio.
ENT key. The primary NAV frequency for the
activated approach is loaded into the standby
field of the selected NAV radio.
Figure 4.4.10 Selecting an Approach
Figure 4.4.11 Loading an Approach