Casio xj xj-360 Manuale Utente

■Signal Settings J Noise Filter

This sub-menu provides a choice of noise filter levels to remove digital noise from the 
projected image when RGB is selected as the input source. Note that the noise filter may not 
be able to remove certain types of digital noise.
z This setting is possible only when RGB is selected as the input source. The setting is 

saved for the RGB input source only.

z Turning off the projector automatically returns this sub-menu to its initial default setting 

(Normal).

Input Source Specific Menu Items 

■Signal Settings J Restore Menu Defaults

This sub-menu returns all of the sub-menu items on the Signal Settings main menu to their 
initial default settings.
z “Signal Settings” main menu “Vertical Position”,  “Horizontal Position”,  “Frequency”, and 

“Phase” settings are initialized for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) 
only.

z For details about the initialization procedure, see “To initialize the settings of a particular 

main menu item” on page 25.

■Screen Settings J Keystone Correction

This sub-menu lets you correct for vertical keystoning of the projected image.

z Vertical keystone correction can be performed regardless of the currently selected input 

source.

z A single setting is stored, which is applied to all input sources.

Input Source

Available Items (Parentheses indicate defaults.)

RGB

Low, (Normal), High

Component

None

S-VIDEO

VIDEO

No Signal