Pelco c1554m-a (4-05) Manuale Utente
78
C1554M-A (4/05)
Table J. KBD300A Button Functions
General instructions: Use the numeric keypad to type camera numbers, monitor numbers, and preset numbers. Your administrator should
instruct you in the valid numbers. The MOM, AUX ON, AUX OFF, HOLD, PATTERN, and MACRO keys are custom keys. Your administrator should
instruct you in each key’s function.
instruct you in the valid numbers. The MOM, AUX ON, AUX OFF, HOLD, PATTERN, and MACRO keys are custom keys. Your administrator should
instruct you in each key’s function.
NOTE: SHIFT must be off. Make sure the LED above the SHIFT key is not illuminated.
Log in: Press the ACK key. Type your user name. Press the CAM key. If you have a password, type your password and press the MON key.
Log out: Press the ACK key.
Select monitor: Type the monitor number and then press the MON key. The keyboard LED displays the selected monitor number.
Switch camera to monitor: Select the desired monitor. Type the camera number. Press the CAM key.
Switch to next camera number: Press the NEXT key.
Switch to previous camera number: Press the PREV key.
Pan and tilt: Select the desired camera. Move the joystick in the direction you want to pan and tilt the camera.
Zoom: Select the desired camera. Twist the joystick counterclockwise to zoom in. Twist the joystick clockwise to zoom out.
Focus near: Select the desired camera. Press and hold the NEAR key until the desired focus is attained.
Focus far: Select the desired camera. Press and hold the FAR key until the desired focus is attained.
Open iris: Select the desired camera. Press and hold the OPEN key until the desired iris is attained.
Close iris: Select the desired camera. Press and hold the CLOSE key until the desired iris is attained.
Preset: Select the desired camera. Type the preset number. Press the PRESET key.
REFERENCE
NUMBER
NUMBER
DESCRIPTION
1
LED display
2
Shift key
3
Shift key LED
4A-C
Sequence keys: Previous, Next, Hold
5
Function keys F1/Latch, F2/Off, F3/Mom control auxiliaries.
With Shift on they control multiplexer display.
With Shift on they control multiplexer display.
6
The AUX ON and AUX OFF keys control receiver auxiliaries.
With Shift on they control multiplexer display.
With Shift on they control multiplexer display.
7
Program key
8
Macro sequence key
9
Preset key
10
Pattern key
11
Joystick
12
Focus and iris keys (iris keys can be used to scroll through menus on the CM6800 only)
13
Clear key
14
Camera selection key
15
Keypad (numbers 1 through 0)
16
Acknowledge key
17
Monitor selection key