Pantech G800 Manuale Utente

119

118

<<<  How to use ‘G800 Bluetooth FTP server’ function  >>>
1. Your  mobile  phone  (G800)  provides Bluetooth FTP  server

function.

2. In order  to  exchange files  with your  phone,  the  other party’s

device must support Bluetooth FTP function. For instance, the FTP
service function will be available in your phone if there is a laptop
with Bluetooth function or a PC where devices such as a Bluetooth
dongle is mounted. 

3. To use the FTP service, pairing with your phone must be set first.

For pairing method, see ’8.2 Paired device.’ After the paring, if you
check  the  Service  list  of your  phone  by using the  Bluetooth
application, you can view the OBEX File Transfer. 

4. Once you access the OBEX File Transfer, you will see the folder

list in  your  phone.  Then,  you  will  be  able  to browse  the folders
and files. 

5. In order to  transfer a  file  to  the  phone  or  bring  a file  from  the

phone, use the commands such as “copy and paste” or “drag and
drop” that are supported in the relevant application program.

6. If the other party’s device requests your phone to transfer a file, the

pop-up message  “Accept  FTP  request?”  will  appear  on your
phone. At this time, pressing [     ] will commence the file transfer,
and pressing [      ] or [        ] will cancel the file transfer..

7. When a file is transferred to your phone, it must be transferred to

the folder pre-defined for the file type in order to ensure that the
file can be viewed properly.

The folders and file types supported in your phone are as follows: 

-  Myimages : jpeg, gif, bmp, wbmp, png.
-  Myanimation : awb
-  Mymelody : imelody, midi, smaf, xsmf
-  Photo : [Read Only]

Your phone does not support to create or delete a folder.

<<<  Bluetooth  Serial Port Protocol   >>>
1. You can use the Pantech Sync G800 program wirelessly by using

the G800 bluetooth serial port. 

2. To view the actual port number, search the G800 service list from

the devices such as a PC or laptop that support Bluetooth function,
and then connect to the G800 COM port. At this stage, initiate the
Pantech  Sync  G800,  and  select Tool setup  to  change  the  port
number to the port number to which the Bluetooth is connected. 

3. Once the connection is enabled properly, you can use the Pantech

Sync G800 program via the Bluetooth.

4. For how to use the Pantech Sync G800 program, see the Pantech

Sync G800 manual provided separately.

<<<  Bluetooth  Dial-Up Networking    >>>
1. You can  use  the  Internet  after you  access  the  GPRS  network  by

using the G800 bluetooth Dial-up Networking function. 

2. You  can use the  Internet  if  you set  the networking  value

appropriate  for the  network  service  provider after  accessing  the
G800 Dial-up networking from a device such as PC or laptop.

3. How to set Bluetooth dial up networking.

If  you  select [Start 

Settings 

Control  Panel 

Phone and

Modem options 

Modem] from the Windows, you can view the

list  of  Bluetooth  modems.  Select  the  corresponding  Bluetooth
modem, and  then  [Enhanced Features], and then  enter  the
following on the [Extra Initialization Commands]: 

AT+CGDCONT=1,”IP”,”Service provider-specific APN”,0,0

From  the  Windows, if you select  [Start 

Settings 

C o n t r o l

P a n e l

Network  and  Dial-up  Connections 

D i a l - u p

Connection], you can view [Bluetooth Connection] (the description
can vary depending on each computer). 

g800en07-2  2004.7.6 3:59 PM  페이지118