Pantech G800 Manuale Utente
133
132
When battery lifetime is shorter than usual:
This may happen when you are in an area with low signal strength. Turn off your
cell phone when it is not in use. Change the battery when battery energy is
exhausted.
This may happen when you are in an area with low signal strength. Turn off your
cell phone when it is not in use. Change the battery when battery energy is
exhausted.
When your cell phone does not turn on:
Make sure your battery is charged. Check to see if your phone works while
recharging the battery.
Make sure your battery is charged. Check to see if your phone works while
recharging the battery.
When you are unable to send a message:
Either you are not registered to receive SMS service, or you may be in an area
where your network service provider cannot provide such service.
Either you are not registered to receive SMS service, or you may be in an area
where your network service provider cannot provide such service.
When you are unable to make a call:
Your phone may be set to”fixed dial.” Cancel the ° fixed dial°± function.
Your phone may be set to”fixed dial.” Cancel the ° fixed dial°± function.
When you are unable to charge the battery:
This may be the result of one of the following three cases.
1. Your charger may be out of order. Contact your nearest dealer.
2. You may be attempting to use the phone in overly hot/cold temperature. Try
changing the charging environment.
3. Your battery may have not been connected to the charger properly. Check the
connector.
This may be the result of one of the following three cases.
1. Your charger may be out of order. Contact your nearest dealer.
2. You may be attempting to use the phone in overly hot/cold temperature. Try
changing the charging environment.
3. Your battery may have not been connected to the charger properly. Check the
connector.
When you are unable to input data into the Phone Book:
Your Phone Book memory may be full. Try deleting some entries from your Phone
Book.
Your Phone Book memory may be full. Try deleting some entries from your Phone
Book.
When you are unable to select a certain function:
You may not be subscribed to that function, or your network service provider may
be in an area where such service cannot be provided. Contact your local service
provider.
You may not be subscribed to that function, or your network service provider may
be in an area where such service cannot be provided. Contact your local service
provider.
If you experience problems while using your mobile phone, please refer to the
following checklist. If the problem persists, contact your dealer or nearest service
center.
following checklist. If the problem persists, contact your dealer or nearest service
center.
When the “Insert SIM Card” message appears:
Make sure the SIM card is correctly installed. Check to see if the SIM card is
working properly. If it does not work, try cleaning the contact point of the card.
If it is out of order, take it to the nearest service center.
Make sure the SIM card is correctly installed. Check to see if the SIM card is
working properly. If it does not work, try cleaning the contact point of the card.
If it is out of order, take it to the nearest service center.
When the “Handset locked enter password” message appears:
Enter the lock code. If you cannot remember the lock code, contact the nearest
service center.
Enter the lock code. If you cannot remember the lock code, contact the nearest
service center.
When the “Enter PIN1” message appears:
Type in PIN1. If you cannot remember it, contact the nearest service center. You
can still receive calls even if your cell phone becomes locked by entering the
incorrect PIN1 on three consecutive attempts.
Type in PIN1. If you cannot remember it, contact the nearest service center. You
can still receive calls even if your cell phone becomes locked by entering the
incorrect PIN1 on three consecutive attempts.
When the “No service” or “Network failure” message appears:
Check the SSI (Signal Strength Indicator) state. If you cannot make a connection in
underground areas or in buildings where signal strength may be low, try moving to
another place. If you still cannot make a connection, contact the nearest service
center.
Check the SSI (Signal Strength Indicator) state. If you cannot make a connection in
underground areas or in buildings where signal strength may be low, try moving to
another place. If you still cannot make a connection, contact the nearest service
center.
When audio quality is poor:
End the phone call and try again.
End the phone call and try again.
When the other party cannot hear you speaking:
Your cell phone may be set to MUTE. Disable the MUTE function.
Your cell phone may be set to MUTE. Disable the MUTE function.
g800en07-2 2004.7.6 3:59 PM 페이지132