Pantech g500 Manuale Utente
115
114
TROUBLESHOOTING
TROUBLESHOOTING
Audio quality is poor. Echo, or noise makes it hard
to hear
Hang up the phone and then dial again.
You may be switched to a better quality network line.
You may be switched to a better quality network line.
Correspondence cannot hear you speaking
Your mobile phone is set to enable MUTE function.
Make mobile phone to UNUTE by pressing.
Make mobile phone to UNUTE by pressing.
The standby time becomes short
You may be in weak signal area.
Turn it off temporarily while you are expecting no calls.
Or your mobile phone battery life may be over.
Then,get a new battery.
Turn it off temporarily while you are expecting no calls.
Or your mobile phone battery life may be over.
Then,get a new battery.
The phone is not turned on
Check the battery capacity or charge the battery.
You can turn your phone on to check during charging.
You can turn your phone on to check during charging.
Unable to send message
You may have not subscribed to SMS service or network service
provider in your area couldn’t support service.
provider in your area couldn’t support service.
Unable to make a call
You mobile phone is set to fixed dial function.
Then, cancel fixed dial function.
Then, cancel fixed dial function.
TROUBLESHOOTING
TROUBLESHOOTING
“Insert SIM Card” message appears
“Handset locked enter password” message appears
If you have any problem while using your phone, please refer to following
check lists to solve problem.
If the problem persists, please contact your dealer immediately for services them.
Make sure that the SIM card is correctly installed.
Check SIM is working properly, it may be defected or out of order.
If so, send it to network service provider.
Or, clean the SIM card contact.
Check SIM is working properly, it may be defected or out of order.
If so, send it to network service provider.
Or, clean the SIM card contact.
Enter the valid lock code.
If you don’t know the valid lock code, contact dealer near you.
If you don’t know the valid lock code, contact dealer near you.
“Enter PIN1” appears
Enter the valid PIN1 code with the SIM card.
If you don’t know the code, contact your dealer.
With handset locked with 3 invalid trials, incoming call could be
received.
If you don’t know the code, contact your dealer.
With handset locked with 3 invalid trials, incoming call could be
received.
“No service”, “Network failure” is displayed
Check the signal strength indicator. The network connection
was lost. You may be in the basement or building where signal is
weak. Move to other location to receive signal properly. In another
case,you may be too far from the base station of your network
service provider.
Then, ask your network service provider service range map.
was lost. You may be in the basement or building where signal is
weak. Move to other location to receive signal properly. In another
case,you may be too far from the base station of your network
service provider.
Then, ask your network service provider service range map.
zeus english 12-13 2003.12.13 3:47 PM 페이지114