Garmin gpsmap 192c Manuale Utente

B

ASIC

 O

PERATION

 > 

I

NITIALIZING

 

THE

 R

ECEIVER

The first time you turn on the GPSMAP 192C, the receiver 

must be given an opportunity to collect satellite data and 

establish its present location. To ensure proper initialization, the 

GPSMAP 192C is shipped from the factory in AutoLocate mode.
Before you initialize, make sure the GPSMAP 192C unit and 

antenna have been correctly installed on your vessel according to 

the instructions in the Appendix. Install the antenna in a location 

with a clear and unobstructed view of the sky.
A full-screen GPS Information page is displayed after you press 

ENTER to acknowledge the Warning page. The page goes away 

after the unit gets a position fix or you press either ENTER 

or QUIT. The page can be disabled and enabled on the Main 

).

1.  Press and hold the 

POWER key until the power tone 

sounds, then release the 

POWER key. The Warning page  

appears while the unit conducts a self-test.

2.   When the self-test is complete, press 

ENTER to agree and 

acknowledge the warning.

The GPS Information page appears as the receiver begins acquiring 

satellites. 

1.  Press and hold the 

POWER key for about 2 seconds, until 

the screen is blank. 

2.   When the screen is blank, release the 

POWER key.