Mercury mountaineer 2005 Manuale Utente
Replacing front parking lamp/turn signal bulbs
1. Make sure headlamp switch is in the OFF position, then open the
hood.
hood.
2. Turn the front wheels inboard and loosen the three screws on the
splash shield in front of the tire.
splash shield in front of the tire.
3. Locate the parking/turn signal
lamp electrical connector and
remove it by pulling it straight off.
lamp electrical connector and
remove it by pulling it straight off.
4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.
turning it counterclockwise and
pulling it straight out.
5. To remove the bulb, pull it
straight out of the bulb socket.
straight out of the bulb socket.
Install the new bulb(s) in reverse order.
Replacing front sidemarker bulbs
1. Make sure headlamp switch is in the OFF position, then open the
hood.
hood.
2. Turn the front wheels inboard and loosen the three screws on the
splash shield in front of the tire.
splash shield in front of the tire.
3. Locate the sidemarker lamp
electrical connector and remove it
by pulling it straight off.
electrical connector and remove it
by pulling it straight off.
4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.
turning it counterclockwise and
pulling it straight out.
5. To remove the bulb, pull it
straight out of the bulb socket.
straight out of the bulb socket.
Install the new bulb(s) in reverse order.
2005 Montego (mgo)
Owners Guide (post-2002-fmt)
USA_English (fus)
Owners Guide (post-2002-fmt)
USA_English (fus)
Lights
38