Garmin eTrex Manuale Utente

24

Using the Project feature, the eTrex can create a 

waypoint at a specifi ed distance and bearing using an 
existing waypoint as a reference. You can also change the 
name, symbol and elevation on this page.

1.   Select a waypoint from the list on the ‘WAYPOINTS’ 

Page and press ENTER.  The ‘REVIEW WAYPOINT’ 
Page is displayed.

2.   Using the UP or DOWN Button, highlight the 

‘PROJECT’ fi eld and press ENTER.  The ‘PROJECT 
WAYPOINT’ Page will appear and a numeric name 
will be assigned to the new waypoint.

3.   The distance fi eld will be highlighted by default. 

Press ENTER to display the ‘EDIT NUMBER’ Page.

4.   On the ‘EDIT NUMBER’ Page, pressing the DOWN 

Button will move the highlight to the next number 
in the fi eld.  With the desired digit selected, press 
ENTER to activate the drop-down number list.

5.   Using the UP or DOWN Button, select the correct 

number and press ENTER.  When all numbers are 
entered correctly, highlight ‘OK’ and press ENTER.

6.   Using the DOWN Button, hightlight the bearing 

fi eld and press ENTER to display the ‘EDIT ANGLE’ 
Page.

7.   On the ‘EDIT ANGLE’ Page, pressing the DOWN 

Button will move the highlight to the next number 
in the fi eld.  With the desired digit selected, press 
ENTER to activate the drop-down number list.

8.   Using the UP or DOWN Button, select the correct 

number and press ENTER. When all numbers are 
entered correctly, highlight ‘OK’ and press ENTER.

9.   The name, symbol and elevation can be changed 

on this page as well.  When all changes have been 
made, highlight ‘OK’ and press ENTER to save the 
waypoint.  Highlight ‘GOTO’ and press ENTER to 
save the waypoint and begin direct navigation to 
the point.

etrex manual.indd

10/12/00, 11:17 AM

24