Motorola dect 6.0 l515bt Manuale Utente

Help

31

•  Make sure the Bluetooth function of your Bluetooth 

enabled mobile phone is turned on. See your mobile 

phone user's manual for more information.

•  Make sure the handset, base unit and cell phone are 

located near each other.

• Remove 

the 

L514BT/L515BT/L502BT from your mobile phone's 

Bluetooth device history list (see your mobile phone 

user's manual for more information).

•  Carefully follow the pairing instructions in the User's 

Guide, making sure that your mobile phone is not 

connected to any other Bluetooth device(s).

•  Turn off your mobile phone, and then turn it on again.

•  Reset the telephone base. Unplug the unit's electrical 

power. Wait for approximately 15 seconds, and then plug 

it back in. Repeat the above suggestions.

•  Incomplete battery contact - adjust the handset on the 

base unit.

•  Dirty contact - clean the battery contact by wiping with an 

alcohol moistened cloth.

•  Battery is full - charging is not necessary at this time.

•  If there is no base power, check the connections. Reset 

the phone by unplugging then plugging it back into an 

electrical outlet.

•  If the handset batteries are empty, recharge the battery 

pack for at least 24 hours.

•  Move the handset closer to the base if it is too far away.

•  Be sure to use the provided telephone cords.

•  If the base is too close to electrical appliances, reinforced 

concrete walls, or metal door frames, move the base 

from these areas.

•  The ring tone may be deactivated.

•  The volume may need to be increased.