Motorola mototrbo xpr 6350 Manuale Utente
English
Audio Indicators for Programmable
Buttons
Buttons
Some programmable buttons use audio
indicators to indicate the change as they
alternate between two different choices.
indicators to indicate the change as they
alternate between two different choices.
Selecting a Radio Channel,
Subscriber ID, or Group ID
Subscriber ID, or Group ID
1
Turn the On/Off/Volume Control Knob to
power up your radio.
power up your radio.
2
Turn the Channel Selector Knob to select the
required channel, subscriber ID, or group ID.
required channel, subscriber ID, or group ID.
Making a Group or Private Call
Press the programmed One Touch Call button
and proceed to step 2.
OR
Follow the procedure below.
and proceed to step 2.
OR
Follow the procedure below.
1
Turn the Channel Selector Knob to select the
channel with the active group ID.
OR
Turn the Channel Selector Knob to select the
channel with the active group ID.
OR
Turn the Channel Selector Knob to select the
channel with the active subscriber ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
5.0 cm) from your mouth.
3
Press the PTT button to make the call. The
LED lights up solid green.
LED lights up solid green.
4
Wait for the Talk Permit Tone to finish (if
enabled). Speak clearly into the microphone.
enabled). Speak clearly into the microphone.
5
Release the PTT button to listen.
6
If the Channel Free Indication feature is
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
enabled, you will hear a short alert tone
the moment the target radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond.
OR
If there is no voice activity for a
predetermined period of time, the call ends.
OR
If there is no voice activity for a
predetermined period of time, the call ends.
For a Private Call, you hear a short tone when
the call ends.
the call ends.
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key as your radio will be
able to unscramble the transmission.
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key as your radio will be
able to unscramble the transmission.
Making an All Call
Your radio must be programmed to allow you to
use this feature. Users on the channel cannot
respond to an All Call.
use this feature. Users on the channel cannot
respond to an All Call.
1
Turn the Channel Selector Knob to select the
channel with the active All Call group ID.
channel with the active All Call group ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
5.0 cm) from your mouth.
3
Press the PTT button to make the call. The
LED lights up solid green.
LED lights up solid green.
4
Wait for the Talk Permit Tone to finish (if
enabled). Speak clearly into the microphone.
enabled). Speak clearly into the microphone.
5
If there is no voice activity for a programmed
period of time, the call ends.
period of time, the call ends.
When you receive an All Call, you cannot use
any programmed button functions until the call
ends.
any programmed button functions until the call
ends.
Programmable
Button
Positive
Indicator Tone
Negative
Indicator Tone
Zone
Currently in Zone
2
Currently in Zone
1
Repeater/
Talkaround
Currently in
Talkaround mode
Currently in
Repeater mode
Scan
Start Scan
operation
Stop Scan
operation
Squelch
Operating in tight
squelch
Operating in
normal squelch
Power Level
Transmitting at
low power
Transmitting at
high power
Tones and
Alerts
All tones and
alerts are on
All tones and
alerts are off
NAG-LACR-EMEA.book Page 36 Wednesday, April 30, 2008 5:11 PM