Garmin g1000 mooney eis pilots guide m20 Manuale Utente
Garmin G1000 EIS Pilot’s Guide for Mooney M20M & M20R
190-00447-01 Rev. A
7-8
ENGINE INDICATION SYSTEM
7.4 FLAP & TRIM INDICATIONS
Rudder Trim Position Indicator
The Rudder Trim Position indicator is located beneath
the EIS strip. Rudder trim position is displayed by a cyan
(light blue) triangle on a horizontal bar indicator. L (left)
and R (right) tick marks are shown. The white bar in-
dicates the takeoff setting range. The rudder trim is not
displayed on the LEAN page.
(light blue) triangle on a horizontal bar indicator. L (left)
and R (right) tick marks are shown. The white bar in-
dicates the takeoff setting range. The rudder trim is not
displayed on the LEAN page.
Figure 7.4.1 Rudder Trim
Elevator Trim Position Indicator
The Elevator Trim Position indicator is located to the
lower right of the EIS strip. Elevator trim position is dis-
played by a cyan (light blue) triangle pointer on a vertical
bar indicator. UP and DN tick marks are shown. The
white bar indicates the takeoff setting range.
played by a cyan (light blue) triangle pointer on a vertical
bar indicator. UP and DN tick marks are shown. The
white bar indicates the takeoff setting range.
Figure 7.4.2 Elevator Trim
Flap Position Indicator
The Flap Position indicator is collocated with the el-
evator trim position indicator. The flap indications are
displayed inside the box on top the elevator trim. The flap
positions are as follows:
displayed inside the box on top the elevator trim. The flap
positions are as follows:
• UP
• T/O (takeoff)
• DN (down)
• T/O (takeoff)
• DN (down)
Figure 7.4.3 Flaps – Up
Figure 7.4.4 Flaps – Takeoff
Figure 7.4.5 Flaps – Down
When the flaps are in transit and not within these rang-
es, ‘///’ is displayed inside the box.
Figure 7.4.6 Flaps – In Transit