Garmin gns 500w Manuale Utente

124

190-00356-00 Rev E

Airport Approaches

Select Next FPL Apt?
As described earlier in this section. 

Select Destination Apt?
As described earlier in this section. 

The airport approach page shows the available 

approach procedures for the selected airport. Where 
multiple initial approach fixes (IAFs) and feeder routes 
are available, that information may also be displayed. 
A map image provides a layout diagram for each 
approach and transition. 

If a WAAS approach has been selected, the WAAS 

approach ID is displayed in the top left corner of the
map. The approach service level is shown in the lower 
right corner of the map. Service level annunciations 
available are: LP, LPV, L/VNAV, LNAV+V, or LNAV.

1.   Press  the  small  right  knob  to  activate  the 

cursor. 

2.   Turn the large right knob to place the cursor 

on the approach (APR) procedure name field. 

3.   Turn the small right knob to display a window 

of available approaches for the selected airport. 
Continue  turning  the  small  right  knob  to 
select the desired approach. 

4.   Press ENT. The cursor moves to the transitions 

(TRANS) field. 

5.   Turn the small right knob to display a window 

of  available  transitions.  Continue  turning 
the  small  right  knob  to  select  the  desired 
transition or select “VECTORS” for guidance 
only  along  the  final  course  segment  of  the 
approach. 

6.   Press ENT. To remove the flashing cursor, press 

the small right knob.