Garmin gns 500w Manuale Utente

25

190-00356-00 Rev E

Auto-Tuning from Nearest Airport Page

The 400W-series auto-tune feature allows you 

to quickly select any database frequency in the GPS 
window as your standby frequency. Any COM fre-
quency displayed in the GPS window can be trans-
ferred to the standby COM frequency field, with a 
minimum of keystrokes required. The following are 
some examples of selecting COM frequencies from 
some of the main GPS pages. 

1.   Select the nearest airport page from the NRST 

page group. Press and hold the CLR key, then 
turn the large right knob until the nearest 
pages appears. Finally, if necessary, turn the 
small right knob to display the nearest airport 
page. 

2.   Press the small right knob momentarily to 

place the cursor on the airport identifier field 
of the first airport in the list. Turn the large 
right  knob  to  highlight  the  desired  airport 
frequency. 

3.   Press ENT to place the frequency in the standby 

field of the COM window. 

4.   Press  the  Com  flip/flop  key  to  swap  the 

standby and active frequencies. 

5.   Before  leaving  the  frequency  page,  use  the 

large right knob to highlight “Done?” and 
press  ENT. “Done?”  always  needs  to  be 
acknowledged before leaving a page group.