Garmin gns 500w Manuale Utente

63

190-00356-00 Rev E

If you’re navigating an active flight plan, any way-

point contained in the flight plan may be selected as 
a direct-to waypoint from the select direct-to waypoint 
page. (see Section 4 - Flight Plans, for more information 
on flight plans.) 

1.   Press the direct-to key. The select direct-to 

waypoint page will appear, with the waypoint 
identifier field highlighted. 

2.   Turn  the  large  right  knob  to  highlight  the 

flight plan (FPL) field. 

3.   Turn the small right knob to display a window 

showing  all  waypoints  in  the  active  flight 
plan. 

4.   Continue  turning  the  small  right  knob  to 

scroll through the list and highlight the desired 
waypoint. 

5.   Press ENT to confirm the selected waypoint, 

and ENT to activate the direct-to function. 

The select direct-to waypoint page always displays 

the nearest airports (from your present position) on 
the NRST field. Navigating directly to a nearby airport 
is always just a few simple steps away. (Nearby airports 
may also be selected as direct-to waypoints using the 
steps described Section 7 - NRST Pages - Navigating to 
a Nearby Waypoint.) 

1.   Press the direct-to key. The select direct-to 

waypoint page will appear, with the waypoint 
identifier field highlighted. 

2.   Turn  the  large  right  knob  to  highlight  the 

nearest airport (NRST) field. 

3.  Turn the small right knob to display a window 

showing up to nine nearby airports. 

4.   Continue  turning  the  small  right  knob  to 

scroll through the list and highlight the desired 
airport. 

5.   Press ENT to confirm the selected airport, and 

ENT to activate the direct-to function. 

 

NOTE: Performing a direct-to the MAP of an ac-
tive approach will cancel approach mode. 

Selecting a Waypoint