Hitachi VT-FX633A Manuale Utente
27
Remote Control Illustration.
4 Press the (1) button to select AUTO BLUE "ON" or "OFF".
ON: The screen becomes blue and mutes sound when a channel without a broadcast signal on the VCR or a
channel on which broadcasting has finished.
• If the signal is too strong, this function may not operate even if you specify <ON>. During playback this function
does not operate.
OFF: The AUTO BLUE feature is switched off.
channel on which broadcasting has finished.
• If the signal is too strong, this function may not operate even if you specify <ON>. During playback this function
does not operate.
OFF: The AUTO BLUE feature is switched off.
5 Press the GUIDE button to end the setting.
CABLE BOX SETUP
Note: This setup should be performed if you receive all channels through a cable box (Hookups [E], [F] or [G]).
The VCR can be programmed to:
• Automatically select channels on the cable box during a timer reocrd or VCR Plus+ delayed recording
operation.
• Change channels on remote controlled cable boxes with the VCR remote control.
• Automatically select channels on the cable box during a timer reocrd or VCR Plus+ delayed recording
operation.
• Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.