Hitachi VT-FX633A Manuale Utente

 

50

                                            

Note: If a cassette has not been inserted or a cassette without safety tab has been inserted, the delayed 
recording indictor will flash to warn you. The cassette without safety tab will be ejected automatically. Be sure to 
insert a cassette with safety tab intact. 

When you have set up all the timed recordings you want: 
• Don't forget to load a videocassette (with the safety tab still attached) to record on. 
• If you have installed a cable box (see page 26), set it up before starting recording. 
If you are using a cable box the VCR can control; 
Turn on the cable box  
If you are using a cable box the VCR cannot control: 
Turn on the cable box and select the channel you want to record on the cable box (08 in this case). 

Note: You can correct any item entered as you go by pressing the CLEAR button repeatedly until the digit to be 
corrected changes to white dash "-" on the screen. Then enter the correct number. Illogical times and dates won't 
be accepted. 

• This can be done either on the VCR or with the remote control. 

Remote Control Illustration.  
Important: Your timed recording settings take effect when you turn off the power on the VCR. 

This handy feature makes timed recording a snap. You don't need to enter the specific channel, date, time or 
duration of a program. All you enter is its PlusCode programming number - a number of up to eight digits. This 
special code is easy to find in your favorite TV program guide or daily newspaper. Here's a sample page from TV 
Guide showing PlusCode numbers next to each program.