Hitachi VT-FX633A Manuale Utente

 

65

4  When you see the part of the program you wish to record, press the PAUSE button on VCR-1 again 
to release pause and start recording. 
• Press the STOP button to finish recording. 

 

No power 

• Make sure the VCR is plugged into an AC outlet. 

Remote control doesn't 
work 

• Make sure the batteries are fresh, and properly 
installed. 

Won't record 

• Safety tab has been removed from cassette (VCR 
will 
  automatically eject the tape). 

Won't play back 

• Make sure the TV/VCR switch is set to the VCR 
mode. 
• Make sure the TV is set to the VCR channel (3 or 
4) or AUX (if 
  using direct audio/video hookup). 

Won't make timer 
recordings 

• The VCR power must be turned off to activate 
timer recording. 
• Clock is not set correctly. 
• Programs entered incorrectly. 
• Programs exceed the length of the cassette. Use 
the EP 
  recording speed for maximum programming. 
• Safety tab has been removed from cassette. 

Snowy picture in playback

• Snow or picture noise is normal during search, 
still, and slow 
  Playback. 
• Head cleaning may be required. 
• Tape is worn or of inferior quality - adjust tracking 
controls. 

Snowy picture in normal 
TV viewing 

• Check antenna or cable connections. 

Clock shows --:-- 

• Power has been interrupted - reset the clock. 
• Reset the clock. 

Erratic VCR display 

• Push the reset switch with a sharp pointed 
instrument (pen, toothpick, etc.).