Hypercom 1101 Manuale Utente

IN-tact 1101 Software Configuration Guide

59

System Status Screen

Current IN-tact 1101 Status:

Current Status

There are two possible displays:

OK: indicates that the device has been configured and is working 
correctly

Not Configured: indicates that the IN-tact 1101 has not been 
properly configured. Go to System Setup and configure the device.

Current Mode

Indicates whether the IN-tact 1101 is operating in “normal” mode or 
“install” mode. 

Install mode is used to test terminal communications and should not 
be left on. Go to Control Panel > System Operations to disable 
install mode if it is on.

System Time

Shows you the current time set for the IN-tact 1101. 

Uptime

Total time that the device has been powered on and operating.

Terminals Enabled

Indicates the number of terminals configured. Terminals are 
configured on the Terminal Port Settings screen.

Terminals Active

Indicates the number of configured terminals that are responding to 
poll and operating correctly. For more detailed information, see the 
Terminal Status screen.

Host Ports Enabled

Indicates the number of host port connections that have been 
enabled.

Product Information:

Product Part Number

Part number (the combination of hardware and software) of the 
IN-tact device

Platform Part Number

Part number of the complete IN-tact 1101 without a firmware load

Serial Number

Unique serial number of this IN-tact device

Hardware Part Number

Part number of the base printed circuit board within the IN-tact 1101

Firmware Name

Filename of the firmware currently loaded on the IN-tact 1101

Firmware Part Number

Version of the firmware currently loaded on the IN-tact 1101

Build Date/Time

When the firmware was compiled

Build Number

Reference number assigned to the firmware

File Size (bytes)

Actual size of the image file in bytes