Garmin GHS 10i Manuale Utente

These installation instructions are for 

the GHS 10 and GHS 10i handsets. 

The GHS 10 is for use with the Garmin 

VHF 200 radio and the GHS 10i is for 

use with the Garmin VHF 200i radio.
For additional information, refer to the 

Instructions that came with your radio. 

For operational instructions, refer to 

your VHF 100/200 Series Radio Owner’s 

Manual.
The handset comes with a 32.8 ft. (10 m) 

extension cable, a bulkhead mounting 

plate, a weather cap, and the necessary 

cable hardware. 
Install the GHS 10 or GHS 10i 

handset at least 20 in. (500 

mm) from any compass.

1.  Using the mounting plate as a 

template, use a center punch to mark 

the three screw locations on the 

surface.

2.  Use a pencil to trace the cable hole in 

the center of the mounting plate. Set 

the mounting plate aside.

3.  Use a ⅞ in. (22 mm) hole saw to cut 

the cable-mounting hole.

4. Use a ⅛ in. (3 mm) drill to drill the 

three mounting-plate holes.