Lowrance electronic 5300c Manuale Utente

52 

To turn off trail display: 
1. Press 

|

|

↓ to 

|

. 

2. Press 

↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-

sired Trail Name|

. 

3. Press 

↓ to 

|

→ to 

|

. To return to the previous page, 

press 

repeatedly. 

To turn on trail display: 
1. Press 

|

|

↓ to 

|

. 

2. Press 

↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-

sired Trail Name|

. 

3. Press 

↓ to 

|

→ to 

|

. To return to the previous page, 

press  

 repeatedly. 

There are three methods for following a trail: visual trailing, navigat-

ing a trail (forward) and backtracking a trail (backward). Try each 

method to see which you prefer. 
Visual trailing is the simplest method. It uses only the Map Page and 

requires no menu commands at all. The technique works the same if 

you are running a trail forward (from start to end) or backward (from 

end to start.) However, visual trailing provides no navigation informa-

tion during the trip, such as the time to your destination. 

The other two methods provide a full range of navigation data and 

work with both the Map Page and Navigation Page. The only difference 

between them is "navigating a trail" follows a trail forward (from start 

to end) while "backtracking" follows a trail in reverse (from end to 

start.) 
When hiking at walking speed with a hand-held GPS, we often just use 

visual back trailing because it is a bit better at following each little 

turn on a foot path. At faster speeds, such as the highway or on the wa-

ter, the Navigate Trail and Backtrack Trail commands are handy. 

Visual Trailing 
1. On the Map Page, zoom (

 or 

) so your flashing trail is visible. 

2. Begin moving and watch the Map Page. Simply walk or steer so that 

your current position arrow traces along the trail you have just made. 

 

www.Busse-Yachtshop.de      email: info@busse-yachtshop.de