Husqvarna H346SL Manuale Utente

5

1.   Remove and discard the upper bolt on both sides of 

the drawbar. Using the same holes, install the shoulder 
bolts supplied and tighten securely.

2.   Align support assembly pin with hole in drawbar and 

hang assembly over the shoulder bolts.

3.      Be sure support assembly is seated properly and secure 

with retainer spring supplied.

3064

:  For ease of assembly, you may wish to obtain 

the as sis tance of another person for mounting cover as-
sembly to tractor.
1.    Lift cover and align cover brackets with support 

assembly tubes.

2.    Slide cover assembly down onto the support tubes.