Lowrance electronic X-4 PRO Manuale Utente

18 

After drilling the hole, pass the connectors up through the hole from 

under the dash. If you wish, you can fill in the hole around the cable with 

a good marine caulking compound. (Some marine dealers stock cable hole 

covers to conceal the opening.) 

These units use a quick release mounting bracket. When you run the 

cables through the bracket's cable slots, make sure you allow enough 

slack for tilting the unit and attaching the connector. (The snug fit of 

the push-on waterproof connector requires some force to attach.) 

Align the bracket over the cable hole with the cable slots facing away 

from you and fit the cable through one of the slots. Fasten the bracket 

to the dash using the three screw holes. 

 

 

Attach the unit to the bracket by first connecting the power/transducer 

and accessory cables. Then, hold the sonar unit vertically and slide it 

onto the bracket from above. (The back of the unit should be touching 

the front of the bracket as you lower it into position.) As you push 

down, the unit will lock into place with a distinct click. 
To adjust the viewing angle, pinch the ratchets with one hand, then tilt 

the unit with your other hand. Release the ratchets and the unit locks 

into the new position. To dismount the unit for storage, press the rat-

chets and lift the unit off the bracket.