Casio XJH2650 Manuale Utente

Pointer

R C V H D U N Single

Use this sub-menu to specify the type of pointer that appears first 
when you press the [POINTER] key.

Plug and Play
(USB port 
models only)

R C V H D U N Single

Use this sub-menu to turn plug-and-play on or off.

*:

Select this option to turn on plug-and-play. This will allow the 
projector detect when an external USB device is connected and 
make that device the input source automatically.

Select this option to turn off plug-and-play.

Note

z For details about plug-and-play, see the “USB Function 

Guide”.

z Regardless of the setting of this item, plug-and-play is 

disabled while the projector is in the 3D input mode (“3D 
Input Mode”, page 17) or “On” is selected for the “Option 
Settings 2 J Interactive Pointer” setting.

Audio Out

R C V H D U N Single

Specifies whether the input audio signal should be output from the 
projector’s built-in speaker or to the line output.

*:

Outputs the audio signal being input to the projector from the 
speaker.

Outputs the audio signal being input to the projector from the 
AUDIO OUT terminal.

High Altitude

R C V H D U N Single

Use this sub-menu to turn the high-altitude fan speed setting on or 
off in accordance with the altitude of the area where you are using 
the projector.

Select this setting when using the projector in a high altitude 
(1,500 to 3,000 meters above sea level) area where air is thin. This 
setting increases cooling efficiency.

*:

Select this setting at normal altitudes (up to 1,500 meters).

Important!

Do not use this projector at altitudes greater than 
3,000 meters above sea level.

Control Panel 
Lock

R C V H D U N Single

Use this sub-menu to disable (lock) and enable (unlock) the 
projector’s control panel.

Select this setting to disable (lock) all projector key operations 
except for [P] (Power).

*:

Select this setting to enable (unlock) projector key operations.

Custom Logo 
Capture

R C V H D U

Single

See “Custom Logo Capture” (page 30).