Garmin gps 500 Guida Utente

137

7 - AUX PAGES

1. Select “Data Field Configuration” from the Setup page, using the steps described on page 128.

2. Rotate the small right knob to select the desired data field option. The following options are available:

• Configurable Data Fields—displays a user-selectable data field of navigation data (e.g.,

bearing, minimum safe altitude, ground speed, track, distance to destination, etc.).

• Traffic Watch—if your GPS 500 is connected to other equipment providing traffic alert

information (e.g., BF Goodrich SKYWATCH™ or RYAN TCAD), a window is provided to
display traffic information. This allows you to monitor traffic conditions from ANY page
and quickly identify traffic hazards. See 400/500 Series Display Interfaces Pilot’s Guide
Addendum for more information on traffic data.

3. Press ENT to accept the selection.

4. When “Configurable Data Fields” is selected, the three selectable fields appear to allow you to select the

desired data type for each one. Rotate the large right knob to highlight the fields, then rotate the small
right knob to display a list of available navigation data types. Continue rotating the small right knob to
select the desired data type and press ENT to approve your selection.

113-138.p65

5/13/03, 3:14 PM

137