Garmin gps 500 Guida Utente
1 - NAV Pages
24
If no flight plan or direct-to destination has been selected only speed, track, altitude, fuel flow and
minimum safe altitude data may be displayed. All other data types appear as blank lines on the Default
NAV page until a destination is selected.
NAV page until a destination is selected.
To select a different data item for any data field:
1. Starting with the Default NAV page, press the MENU key to display an options menu.
2. Rotate the large right knob to highlight “Change Fields?” and press ENT to select this option.
3. Use the large right knob to highlight the data field you wish to change.
4. Rotate the small right knob to display the list of available data items. Continue rotating the small right
knob to select the desired data item from the list.
5. Press ENT to select the desired data item and return to the Default NAV page.
6. Press the small right knob momentarily to remove the cursor from the page.
Restoring Factory Settings
You can also quickly return all data field settings to their original factory settings.
To restore all four selectable data fields to factory default settings:
1. Starting with the Default NAV page, press the MENU key to display an options menu.
2. Rotate the large right knob to highlight the “Restore Defaults?” option and press ENT.
Dual Unit Considerations
A “Crossfill?” option is provided from the Default NAV page. This option allows you to transfer a
direct-to destination, the active flight plan, any stored flight plan or user waypoints to a second
500-series Garmin unit.
500-series Garmin unit.
Some crossfill operations can be done automatically. If both 500-series units are set to “auto”, a
change in the direct-to destination or active flight plan on one unit can also be seen on the other. See
page 47 for additional details on using the “Crossfill?” option.
page 47 for additional details on using the “Crossfill?” option.
Once “Change Fields?” is selected, use the large right
knob to select the field you wish to change and the
small right knob to select the new data type.
knob to select the field you wish to change and the
small right knob to select the new data type.
The “Restore Defaults?” option returns all data
fields to their original factory settings.
fields to their original factory settings.
Default NAV Page
21-37.p65
5/8/03, 3:26 PM
24