Casio MA0304-A Manuale Utente

1

MA0304-A

Press 

C

.

Seconds

Hour, Minutes, Year, Month, Day

Press 

D

 to reset to 00.

Press 

D

 to increase the setting.

•

Button operations are indicated using the letters shown
in the illustration.

•

Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

•

In any mode, hold down 

C

 for about two seconds to return to the Timekeeping Mode.

Use the Timekeeping Mode to set and view the current
time and date.

To set the time and date
1. In the Timekeeping Mode, hold down 

A

 until the

seconds start to flash, which indicates the setting
screen.

2. Press 

C

 to move the flashing in the sequence shown

below to select other settings.

Seconds

Hour

Minutes

Day

Month

Year

3. When the setting you want to change is flashing, press 

D

 to change it as

described below.

•

Pressing 

D

 while the seconds are in the range of 30 to 59 resets them to 00 and

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press 

A

 to exit the setting screen.

•

The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.

•

The year can be set in the range of 2000 to 2099.

•

The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced or when
battery power drops to Level 4.

To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press 

D

 to toggle between 12-hour timekeeping and

24-hour timekeeping.

•

With the 12-hour format, the  P (PM) indicator appears to the left of the hour digits
for times in the range of noon to 11:59 p.m. and no indicator appears to the left of
the hour digits for times in the range of midnight to 11:59 a.m.

•

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.

•

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.

You can set up to five independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms can be configured as a
snooze alarm or a one-time alarm, while the other four are
one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.

•

There are five alarms numbered

1

 through 

5

. You can

configure Alarm

1

 as a snooze alarm or a one-time

alarm. Alarms 

2

 through 

5

 can be used as one-time

alarms only.

•

You can configure alarm settings and Hourly Time
Signal settings in the Alarm Mode, which you enter by
pressing 

C

.

Alarm Types
The alarm type is determined by the settings you make, as described below.

•

Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.

•

Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.

•

Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at time you set, only during the month you set.

•

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at time you set, on the day you set.

1. In the Alarm Mode, use 

D

 to scroll through the alarm

screens until the one whose time you want to set is
displayed.

Press .

•

To set a one-time alarm, display one of the screens indicated by an alarm number
from 

2

 

through 

5

. To set the snooze alarm, display the screen indicated by

1

.

2. After you select an alarm, hold down 

A

 until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

•

This operation automatically turns on the alarm.

3. Press 

C

 to move the flashing in the sequence shown below to select other

settings.

Hour

Minutes

Month

Day

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to carefully read this manual and keep it on hand for later reference
when necessary.

Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.

•

If the Power Saving on (P.SAVE) indicator flashes on
the display, it means that the display is blank because
the watch’s Power Saving function has turned off
the display to conserve power. Power Saving
automatically turns off the display and puts the watch
into a sleep state whenever your watch is left for a
certain period where it is dark.

•

The initial factory default setting is Power Saving on.

•

The watch recovers from the sleep state if you move it
to a well-lit area, if you press any button, or if you
angle the watch towards your face for reading.

•

•

Press 

C

 to change from mode to mode.

•

In any mode, press 

B

 to illuminate the display.