Garmin gpsmap 740s Manuale Utente

Almanac, On-boat, and Environmental Data

You can specify the source of the velocity made good (VMG) data that is used to calculate true wind speed. 

Before you can configure the VMG source, the wind gauge must be set to Show True Wind (

). Water 

speed is the speed reading from a water-speed sensor, and GPS speed is calculated from your GPS position.
1.  From the Home screen, select Information > Dashboard Gauges > Wind > Menu > VMG Source.
2.  Complete an action:

•  Select GPS Speed.
•  Select Water Speed.
•  Select Auto to allow your chartplotter to select the source.

You can specify whether the vessel speed data displayed on the compass is based on water speed or GPS 

speed. Water speed is the speed reading from a water-speed sensor, and GPS speed is calculated from your 

GPS position.
1.  From the Home screen, select Information > Dashboard Gauges > Wind > Menu.
2.  Complete an action:

•  Select Speed Display > GPS Speed to display the speed of the vessel based upon GPS readings.
•  Select Speed Display > Water Spd to display the speed of the vessel based upon the reading from a 

water speed sensor.

You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data 

received from a heading sensor, and GPS heading is calculated by your chartplotter GPS (course over ground).
1.  From the Home screen, select Information > Dashboard Gauges > environment > Menu.
2.  Complete an action:

•  Select Heading Source > GPS Hdg.
•  Select Heading Source > Magnetic.

You can specify the range of the close hauled wind gauge for both the upwind scale and the downwind scale.
1.  From the Home screen, select Information > Dashboard Gauges > Wind > Menu.
2.  Complete an action:

•  Select Change Upwind Scale. Set the maximum and minimum values that appear when the upwind 

close hauled wind gauge appears.

•  Select Change Downwind Scale. Set the maximum and minimum values that appear when the 

downwind close hauled wind gauge appears.