Meade night view Manuale Utente
Introduction
The Meade
®
NightView™ is a digital night vision observing
device that can be used during both the daytime and
nighttime. NightView fits easily into your hand, and is a
portable, low-light device that is ideal for the outdoorsman,
boater or nature hobbyist, as well as the user seeking an
inexpensive, low-light or no-light security device to interface
with VCR’s.
nighttime. NightView fits easily into your hand, and is a
portable, low-light device that is ideal for the outdoorsman,
boater or nature hobbyist, as well as the user seeking an
inexpensive, low-light or no-light security device to interface
with VCR’s.
Parts List
•
NightView device containing a battery pack with a 9v
connector (batteries are not included); 6 ft. 9v wall
adapter; hand strap; carry pouch.
connector (batteries are not included); 6 ft. 9v wall
adapter; hand strap; carry pouch.
•
Red, green and neutral filters for the eyepiece.
Operation
Numbers in parentheses refer to Figs. 1-4.
•
Install batteries: Slide back the battery compartment lid
(9). Remove the battery pack (13). Insert six user-
supplied AA batteries into the pack in the orientation
indicated by the illustration in the battery slots of the pack.
(9). Remove the battery pack (13). Insert six user-
supplied AA batteries into the pack in the orientation
indicated by the illustration in the battery slots of the pack.
Note: Follow the battery manufacturer’s precautions.
Do not install batteries backward or mix new and
used batteries. Do not mix battery types. If these
precautions are not followed, batteries may explode,
catch fire or leak. Improperly installed batteries void
your Meade warranty.
Do not install batteries backward or mix new and
used batteries. Do not mix battery types. If these
precautions are not followed, batteries may explode,
catch fire or leak. Improperly installed batteries void
your Meade warranty.
Note: NightView may become warm during the last
few minutes of battery life. This is normal. NightView
attempts to extend its operational life by drawing on
the batteries until they are entirely depleted. To do
so, the unit uses additional current, which results in
heat. This is not abnormal. Users may wish to
change batteries at this time. Warning: Batteries
may be hot.
few minutes of battery life. This is normal. NightView
attempts to extend its operational life by drawing on
the batteries until they are entirely depleted. To do
so, the unit uses additional current, which results in
heat. This is not abnormal. Users may wish to
change batteries at this time. Warning: Batteries
may be hot.
Snap the 9v connector (12) to the top of the battery pack,
if it is not already connected. Reinsert the battery pack
into the compartment so that the 9v connector wires are
not under the battery pack, but positioned behind the
connector. Slide the lid back onto the device.
if it is not already connected. Reinsert the battery pack
into the compartment so that the 9v connector wires are
not under the battery pack, but positioned behind the
connector. Slide the lid back onto the device.
•
Install Wall Adapter (Indoor Use Only): You can use
the wall adapter in place of batteries. Locate and remove
the small rubber plug covering the RCA port (10) and then
remove the battery compartment lid (9). Disconnect the
9v connector (12) from the battery pack(13). Slide the 9v
adapter end of the wall adapter cord through the hole in
the top side of the battery compartment and attach to the
9v connector. Reattach the battery compartment lid. Plug
the other end of the wall adapter into an indoor household
electrical outlet. Caution: The wall adapter should only
be used with an indoor household electrical outlet.
the wall adapter in place of batteries. Locate and remove
the small rubber plug covering the RCA port (10) and then
remove the battery compartment lid (9). Disconnect the
9v connector (12) from the battery pack(13). Slide the 9v
adapter end of the wall adapter cord through the hole in
the top side of the battery compartment and attach to the
9v connector. Reattach the battery compartment lid. Plug
the other end of the wall adapter into an indoor household
electrical outlet. Caution: The wall adapter should only
be used with an indoor household electrical outlet.
•
Turn on power to the device: Press down on the power
button (3) until you hear it click.
button (3) until you hear it click.
•
Bring it all into focus: The first time you try this
procedure, try it during the daytime to get a feel for
focusing objects before attempting to focus at night.
Look through the eyepiece at the black border
surrounding the viewing area. Rotate the eyepiece (7)
until the border comes into sharp focus.
If you have a problem seeing the black border, first adjust
the objective lens (1) until an object comes into rough
focus. Then rotate the eyepiece until you get a sharp
focus. For example, point NightView at an easy-to-see
object 20 to 50 yds. away, such as a telephone pole or
traffic sign, and practice focusing. Practice focusing on
several objects until you feel comfortable with the
procedure.
procedure, try it during the daytime to get a feel for
focusing objects before attempting to focus at night.
Look through the eyepiece at the black border
surrounding the viewing area. Rotate the eyepiece (7)
until the border comes into sharp focus.
If you have a problem seeing the black border, first adjust
the objective lens (1) until an object comes into rough
focus. Then rotate the eyepiece until you get a sharp
focus. For example, point NightView at an easy-to-see
object 20 to 50 yds. away, such as a telephone pole or
traffic sign, and practice focusing. Practice focusing on
several objects until you feel comfortable with the
procedure.
Fig. 1
1. 12mm f/1.2 Objective lens
2. Infrared light array
2. Infrared light array
Emits a powerful,
well-dispersed infrared light.
Can illuminate objects
100 or more yds. away.
well-dispersed infrared light.
Can illuminate objects
100 or more yds. away.
3. Power
button
4. Display
brightness
5. Infrared
control
6. 2x
zoom
7. Adjustable
eyepiece
•
Test drive the 2x digital zoom feature: Point NightView
at an object and press down and hold the digital zoom
button (6). If an object looks out of focus while using the
zoom, you have not yet sharply focused NightView.
Release the zoom button and refocus NightView, as
previously described (see above).
Practice with the digital zoom feature during the daytime
also. It should take you no more than a few minutes to
feel comfortable with the focus and zoom features.
at an object and press down and hold the digital zoom
button (6). If an object looks out of focus while using the
zoom, you have not yet sharply focused NightView.
Release the zoom button and refocus NightView, as
previously described (see above).
Practice with the digital zoom feature during the daytime
also. It should take you no more than a few minutes to
feel comfortable with the focus and zoom features.
•
You’re ready for the night: Once you feel comfortable
with the focus and digital zoom, try out these features at
night. To illuminate objects at night, you will need to
adjust the display brightness (4) and infrared control (5).
with the focus and digital zoom, try out these features at
night. To illuminate objects at night, you will need to
adjust the display brightness (4) and infrared control (5).
•
Observe in Infrared: Point NightView at an object and
press the infrared control button (5). Notice that infrared
control is actually made up of two buttons; the front button
which increases the infrared intensity to its maximum
level and the rear button which decreases the infrared
intensity to its minimum level.
press the infrared control button (5). Notice that infrared
control is actually made up of two buttons; the front button
which increases the infrared intensity to its maximum
level and the rear button which decreases the infrared
intensity to its minimum level.
Press and hold down one end of the infrared control.
Then, hold down and press the other end of the button.
You will notice the object you have chosen quickly
becomes very bright and and then quickly becomes very
dim (or vice-versa, depending upon which end of the
button you pressed first).
Then, hold down and press the other end of the button.
You will notice the object you have chosen quickly
becomes very bright and and then quickly becomes very
dim (or vice-versa, depending upon which end of the
button you pressed first).
Make the image dim (press and hold down on the back
infrared button). Then, instead of pressing and holding
down on the button, just click the button briefly. Continue
to click briefly on the button. Note how the intensity
infrared button). Then, instead of pressing and holding
down on the button, just click the button briefly. Continue
to click briefly on the button. Note how the intensity
Operating Instructions
Meade
®
NightView
™
Digital Night Vision Monocular
Fig. 1
Fig. 3
Fig. 4
b
j
1)
1!
1@
1#
1#
c
d
e
f
g
h
Fig. 2
8. Eyepiece
cover
Fig. 3
9. Battery
compartment
10. RCA
port
11. Mounting adapter thread
Fig. 4
12. 9v connector
13. Battery pack
12. 9v connector
13. Battery pack
i
Fig. 2