Homelite 19591a Manuale Utente

19591A

4-04

GUTTER MAINTENANCE KIT

1. Make sure blower has been turned off. Remove all tube

attachments from the blower. (See illustration 1.)

2. Make sure adapter is free to rotate on the elbow. Loosen

clamp and install over exposed end of elbow. (See illustra-
tion 2.)

3. Attach above assembly (as shown in illustration 3) over

blower exhaust until elbow clamp groove matches blower
groove. Align assembly so adapter end points upward.
Tighten clamp screw.

4. Attach full elbow threaded joint onto straight tube. Continue

attaching straight tubes until the preferred length is acquired.
Make sure all joints are screwed tightly into position or the
blower may vibrate and push tubes apart. (See illustration
4.)

For models:
HB180, HB180V, HB180VI, HB180VGK, HB290, HB290V, HB390, HB390V, HB390VI, Yard Sweeper, UT08929A, UT08930A,
UT08120, UT08931, UT08932, UT08934, Vac Attack II, Yard Broom II