GMC sierra 2002 Manuale Utente

1. Remove the two pins on the top of the headlamp

assembly. To remove the pins, turn the outer pin
outward and pull it straight up. To remove the inner
pin, turn it in and pull it straight up.

A. Low

-

Beam Headlamp

B. High

-

Beam Headlamp

2. Pull the headlamp assembly out.

3. Unplug the electrical connector.

4. Turn the old bulb counterclockwise and remove it

from the headlamp assembly.

5. Put the new bulb into the assembly and turn it

clockwise until it is tight. Use care not to touch the
bulb with your fingers or hands.

6. Plug in the electrical connector.

7. Put the headlamp assembly back into the vehicle.

Install the two pins.