Garmin gpsmap 96 Manuale Utente

a

ppendIx

 > 

 

PGRME (estimated error), PGRMM (datum string), 

PGRMZ (altitude), PSLIB (beacon receiver control)
DGPS (Differential GPS) corrections are accepted in 

RTCM SC-104 version 2.0 format through the ‘Data 

In’ line. The Garmin GBR 21 is the recommended 

beacon receiver for use with the GPSMAP 96/96C. 

Other beacon receivers with the correct RTCM format 

can be used, but may not correctly show status or 

allow tuning control from the GPS unit. 
The USB Interface Cable provided with this unit 

allows you to connect your GPSMAP 96/96C to a PC-

compatible computer’s USB port. 

The GPSMAP 96/96C is provided with interface 

connection to a PC using either a serial port or USB 

connector cable. Connection to your computer is 

necessary for downloading of detailed map from 

Garmin MapSource

®

 and Jeppesen

®

 Map Data CDs. 

You can also save routes, waypoints, and tracks 

from the GPSMAP 96/96C to MapSource. Refer to 

the MapSource User’s Guide provided with your 

MapSource CDs.

1.   Lift the USB protective cover from the back of 

the GPSMAP 96/96C and insert the smaller 

connector on the USB cable (provided with the 

unit) into the matching port.

2.   Connect the remaining cable end to your PC 

USB port.

3.   The USB connection is automatically set for 

Garmin format.

1.   Lift the Serial Port protective cover from the 

back of the GPSMAP 96/96C and insert the 

round indexed connector on the  cable into the 

matching port.

2.   Connect the remaining cable end to your PC 

Serial port or other appropriate device.

3.   Set your GPSMAP 96/96C interface setting 

to the appropriate interface format. Refer to 

Interface Setup on 

page 104

.