Garmin g1000 beechcraftbaron58 g58 pilots guide Manuale Utente

Garmin G1000 MFD Pilot’s Guide for the Beechcraft 58/G58

190-00629-00  Rev. B

7-48

DIRECT-TO NAVIGATION OPERATIONS

Selecting a Direct-to Waypoint

In  addition  to  selecting  a  Direct-to  waypoint  using 

an identifier, a Direct-to waypoint can be selected in the 
following ways:

•  by facility or city name
•  from the active flight plan
•  from the nearest airports list
•  from a waypoint field, waypoint page, or map 

highlight shortcut

Selecting a Direct-to Destination by Facility or City 
Name
In addition to selecting a destination by identifier, the 

Direct-to Page also allows the selection of airports, VORs 
and NDBs by facility or city name.  If duplicate entries  
exist for the entered facility or city name, additional entries 
can be viewed by continuing to turn the small FMS knob 
during the selection process. 

1.  Press the Direct-to key. The Direct-to Page is 

displayed  with  the  waypoint  identifier  field 
highlighted.

2.  Turn the large FMS knob to highlight the facility  

or city name field.

3.  Turn the small and large FMS knob to enter 

the  facility  or  city  location  of  the  desired 
waypoint.

NOTE: the “Spell N Find” feature selects the first 
entry in the database based on the characters 
that have been entered to that point.

4.  Continue turning the small FMS knob to scroll 

through  any  additional  database  listings  for 
the selected facility name or city.  The small 
FMS knob can be used to scroll backwards if 
the desired waypoint was passed up.

5.  Press  the  ENT  key  to  confirm  the  selected 

waypoint, and 

ENT again to activate a Direct-

to.