Garmin g1000 beechcraftbaron58 g58 pilots guide Manuale Utente
![Garmin](https://files.manualsbrain.com/attachments/994f895c1fe9ba298f5fc917e3283ea0d22ac77e/common/fit/150/50/527c517f51a09dedc2e7b1a673b0cf7834e289874ec6cfcd6322d2baf6d7/brand_logo.png)
190-00629-00 Rev. B
Garmin G1000 Pilot’s Guide for the Beechcraft 58/G58
9-33
OPTIONAL EQUIPMENT
Figure 9-18 Adjusting Tilt on Vertical Scan Display
Tilt Line
Scan Line
On the Vertical Scan Display
1. Press the TILT softkey to activate the cursor in
the TILT field and display the Tilt Line.
If the Tilt Line is not displayed, press the MENU
key and turn the large FMS knob to select
‘Show Tilt Line’. Press the ENT key.
key and turn the large FMS knob to select
‘Show Tilt Line’. Press the ENT key.
2. Turn the small FMS knob to adjust the antenna
tilt angle. The selected tilt angle will be
implemented when Horizontal Scan is again
selected.
implemented when Horizontal Scan is again
selected.
Vertically Scan a Storm Cell
1. While in the Horizontal Scan view, press the
BRG softkey. This will place the cursor in the
BEARING field and display the Bearing Line.
BEARING field and display the Bearing Line.
If the Bearing Line is not displayed, press the
MENU key and turn the large FMS knob to select
‘Show Bearing Line’. Press the ENT key.
MENU key and turn the large FMS knob to select
‘Show Bearing Line’. Press the ENT key.
2. Turn the small FMS knob to place the Bearing
Line on the desired storm cell, or other area,
to be vertically scanned.
to be vertically scanned.
3. Press the VERTICAL softkey. A vertical ‘slice’ of
the selected area will now be displayed.
4. The small FMS knob may be used to move the
scanned ‘slice’ a few degrees right or left.
5. Turn the joystick to adjust the range.
6. Press the FMS knob to remove the cursor.
7. To select a new area to be vertically scanned,
6. Press the FMS knob to remove the cursor.
7. To select a new area to be vertically scanned,
press the HORIZON softkey to return to the
Horizontal Scan view and repeat the previous
steps.
Horizontal Scan view and repeat the previous
steps.
Figure 9-19 Bearing Line on Horizontal Scan
Bearing Line
Scan Line