Garmin gpsmap 3006c Manuale Utente

24

24

GPS is all about marking positions as waypoints and navigating to them using the receiver’s steering 

guidance and map displays. We’ve already seen how to use the ENTER/MARK key to store our present 
position, so it’s time to move on to the fun part—going to a destination. 

The NAV/MOB key is the primary tool used to select a destination Waypoint, TracBack (pg. 45), or a 

Route (pg. 49) to navigate. The NAV key can be used in two primary ways:

•  Pressing NAV once displays a list of options from which you can select ‘Go To Point’, ‘Follow Route’, 

‘Follow Track’, ‘TracBack’, or ‘Stop Navigation’.

•   Highlighting an on-screen waypoint or map item as a destination directly from the Map Page and 

pressing NAV allows you to graphically select points to “Go To”.

When you begin navigation to a waypoint, the GPS sets a straight-line course to that point. The unit 

draws a Course Line on the display between the current GPS location and the destination waypoint. You 
may use the Map, Compass, or Highway Main Pages (or confi gure any of the other Main Pages) for naviga-
tion. For this exercise, let’s use the Compass Page. You may use the “Practice 1” waypoint you created on 
the previous page or any other waypoint you have created.

1. Press the 

 key.

2.  Highlight ‘Go To Point’ and press 

 (or press the DATA ENTRY shortcut number).

3.  Highlight ‘Waypoints’ and press 

. This displays the ‘Find Waypoints’ window. From this window you 

can select waypoints by “Nearest” or “By Name”. Select the ‘Nearest’ tab using the 

.

4. Press the 

 UP or DOWN to scroll through the list until the waypoint you wish to navi-

gate to is highlighted. Press 

 to display the waypoint Review page. 

5.  With the ‘Go To’ button highlighted, press 

 to begin navigation.

Press the PAGE key and select the Compass Page.

Going to a Waypoint