Garmin gpsmap 3006c Manuale Utente

42

42

4. With ‘Next’ highlighted, press ENTER to return to the list. The fi eld highlight automatically moves to the 

next waypoint in the list.

The following options are available by pressing ADJ/MENU while highlighting a waypoint on the 

‘User’ submenu of the ‘Points’ tab:

•      Delete Waypoint— deletes selected waypoint from list and any route in which it was used.
•   Delete By Symbol— deletes waypoints that use the same symbol.
•   Delete All— deletes all waypoints from the unit.

Once a waypoint is deleted from the list, it cannot be recovered from the unit. It is advisable to save 

important waypoints to a data card, or write them down by hand.

1. Use the ARROW KEYPAD to highlight the waypoint to be deleted. 

2. Press ADJ/MENU, select ‘Delete Waypoint’ and press ENTER.

OR, press ENTER, select the ‘Delete’ button from the Review page and press ENTER.

1.  From the ‘User’ tab, highlight the waypoint to be deleted and press ADJ/MENU, then select ‘Delete By 

Symbol’ and press ENTER.

2. Use the ARROW KEYPAD to highlight the symbol of the waypoint(s) to be deleted and press ENTER.

3. Press ENTER to confi rm. Choose ‘Cancel’ or press QUIT to stop the deletion.

1. Press ADJ/MENU to select the options window.

2. Use the ARROW KEYPAD to highlight ‘Delete All’ and then press ENTER.

3.  Highlight the ‘OK’ prompt and press ENTER to confi rm.

The ‘Proximity’ submenu of the Points tab lets you defi ne an alarm circle around a stored waypoint 

position, and can be used to help you avoid reefs, rocks, or restricted waters. Up to ten waypoints may be 
listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers. If a proximity alarm 
circle overlaps with an existing alarm circle, the message ‘Proximity Overlaps Another Proximity Waypoint’ 

Waypoint Delete Options

Proximity Waypoints List