Garmin gpsmap 3006c Manuale Utente
46
Getting Started
Main Page Sequence
46
Reference
4. Next, the track begins saving and then displays the ‘Saved Track’ window when done. The default name,
distance, number of points (700 maximum), and a map overview are displayed.
To change the name of the saved track, highlight the name fi eld and press ENTER, make your changes and
press ENTER again.
To choose a Color that is used to display the saved track line, highlight the fi eld and press ENTER, choose
a Color and press ENTER again.
To display the track on the Map and Highway pages, highlight the check box to the left of ‘Show on Map
and Highway’ and press ENTER.
5. Highlight ‘OK’ and press ENTER to save the track.
To activate a Follow Track using the NAV key:
1. Press the NAV key, then select ‘Follow Track’.
2. Highlight the track you wish to follow and press ENTER.
3. If you wish to invert (navigate it in the reverse direction) the Follow Track, press NAV and select ‘Invert
Route’.
To activate a TracBack using the NAV key:
1. Press the NAV key, then select ‘TracBack’.
2. On the ‘TracBack Through’ window, highlight the desired time, date, or ‘Entire Log’ and press ENTER.
Once a TracBack has been activated, the GPSMAP 3006C/3010C takes the track log currently stored in
memory and divides it into segments called ‘legs’. Up to 300 temporary ‘turns’ (BEGIN, TURN 1, TURN 2,
TURN 3,...., TURN X, END) are created to mark the most signifi cant features of the track log in order to
duplicate your exact path as closely as possible. To get the most out of the TracBack feature, remember the
following tips:
TURN 3,...., TURN X, END) are created to mark the most signifi cant features of the track log in order to
duplicate your exact path as closely as possible. To get the most out of the TracBack feature, remember the
following tips:
• Always clear the track log at the point that you want to go back to (dock, etc.).
• The ‘Record Mode’ option on the track log setup page must be set to ‘Fill’ or ‘Wrap’. (see page 61)
• There must be at least two track log points stored in memory to create a TracBack route.
• If the track log interval is set to the ‘Time’ option, the route may not follow your exact path (keep
• The ‘Record Mode’ option on the track log setup page must be set to ‘Fill’ or ‘Wrap’. (see page 61)
• There must be at least two track log points stored in memory to create a TracBack route.
• If the track log interval is set to the ‘Time’ option, the route may not follow your exact path (keep
the interval set to ‘resolution’ for best performance).
Default Track
name
name
Check this box
to display track
to display track
Total Distance
Total number
of points
of points
You must fi rst save a track before using the
‘Follow Track’ option. If there are no saved tracks,
the message “There are no saved Tracks to
follow” appears after you select ‘Follow Track.’
‘Follow Track’ option. If there are no saved tracks,
the message “There are no saved Tracks to
follow” appears after you select ‘Follow Track.’
Change color
of track line
of track line
Going to a Destination